Installed the left/right aileron pushrods in the wings. I used a shorter pushrod to confirm that the eyebolts I had already installed inside the fuselage were the right-hand thread type so that I put the correct end first into the wing. Tamped down the rivet heads on the end and added a small film of grease to get it through the bushing about mid-way through the wing. Will wait to torque down the bolt until final rigging is done. On the inspection ports in the wing I noticed that I had not used epoxy so to be sure I went back and added some JB Weld to the rivnut to ensure it doesn't spin in the future upon use.